Teburin aiki na dabba mai ƙarfi na DWV-III yana samuwa don ayyukan dabbobi da yawa kamar alade, karnuka, da tumaki da sauransu.Kuma injina masu ma'ana da ingantattun injunan sa da ingantaccen aikin sa suna sa shi sauƙi kuma a yi amfani da shi.
Gabatarwar samfur
1. Zazzabi na allon tebur yana samuwa daga zafin jiki na cikin gida zuwa 50 digiri centigrade.
Kafin aikin, ana buƙatar dumama minti 20 don zafin da aka ba da umarnin.
2. Jirgin tebur yana ɗaga hydraulic.
3. Dama-da-hagu gradient ne 15 °, kayyade ta da manual inji tsarin.
4. The fore-and-aft gradient ne 45 °, kayyade da hannu.
5. An tsara teburin tare da kayan aiki masu dacewa, ingantaccen aiki da aiki mai sauƙi.
6. Mafi ƙasƙanci tsawo na tebur-board shine 820mm, kuma mafi girma shine 930mm.
Ma'aunin Injiniya
1) Tsawon tebur: 820mm zuwa 930mm
2) Girman tebur: 1400mm × 650mm
3) Girman tebur: ± 15°
4) V- saman: 0 zuwa 45 °
5) Zazzabi: 0-50 ° C
Shigarwa da Amfani
1) Sanya allon tebur a saman teburin tebur, toshe cikin fil, sannan ana iya amfani dashi.
2) Lokacin amfani da tire, ya kamata a dunƙule dunƙule ƙasa.
3) Lokacin daidaita tsayi, taka kan feda a hankali, sannan allon tebur ya tashi;taka kan fedal zuwa mafi ƙasƙanci kuma danna allon tebur a hankali, sannan ya sauko.
4) Na'urar karkatar da hankali tana aiki lokacin da ake dasa keken hannu.
5) Ya kamata a kulle kusoshi masu goyan bayan 4 zuwa groud lokacin haɗa teburin.Masu simintin za su sanya shi sassauƙa lokacin da aka buɗe skru.
6) Yayin aikin, yakamata a daidaita ma'aunin nunin zuwa wurin da ya dace kuma a gyara shi da farko, kuma za a ɗaure dabbar sannan.Idan ana buƙatar tukunyar, ana iya shigar da shi a cikin bututun gefe kuma a gyara shi.
7) Don Allah a daina taka tsantsan, idan juriya ta yi ƙarfi a lokacin hawan sama da ƙasa.
8) Da fatan za a karanta gabatarwar jagora kafin aiki.
9) Da fatan za a tsaftace allon tebur bayan amfani.
Teburin tiyatar dabbobi
Ƙarin cikakkun bayanai na Tebur na Autopsy
