MeCan Medical Professional Blood Infusion Warmer manufacturers,More than 20000 customers choose MeCan. The blood infusion warmer is intended to provide continuous heating during infusion or blood transfusion. The blood & infusion warmer is to heat the infusion fluid by continuous heating the fluid inside the IV tube and deliver the heat to fluid through the extended tube. The temperature can be set between 32℃~42℃ and the control heating board will work based on the set temperature to reach the fluid target temperature. If you are interested in it, please contact in any time!
Quantity: |
---|
Portable Blooed Infusion Warmer
Model:MCO-115A
Main Control System: It is the core of the whole system. It can intelligently control, manage and processing the signal of the system.
Heating Device: Consisted by the heating sheet and the heating exchanger. Deliver the heat to the fluid through exchanger.
Detection Sensor: Consisted by different kinds of sensor, eg. Temperature detection sensor.
Alarm system: Consisted by audio, visual alarm, remind the user the abnormal information to avoid the harm to the patient.
Input and display: Input the heating parameter, eg. Temperature, alarm message and other parameter.
Technical Specification:
Safety Compliance
Protection against electric shocks: Class II, include the internal power supply
Protection against leakage current: Type BF, the part without defibrillation discharge effect
Protection against splashing fluid: IPX1
Working Mode:Constant working mode
Input Voltage: 100-240V
Frequency: 50Hz/60Hz
Power: 85VA
Working and Transportation and storage conditions
Temperature :+5℃~+30℃
Relative Humidity :20~80%,not condensation
Atmospheric Pressure:70KPa~106Kpa
Transportation and Storage Temperature:-20℃~+55℃
Transportation and Storage Humidity :10~95%, not condensation
Transportation and Storage Atmospheric Pressure:50KPa~106Kpa
Transportation and Storage Condition : No corroded air and good ventilated environment
Physical Specification
Device Dimension:180mm×70mm×35mm
Weight:≈0.2KG (without knob); 0.4kg (with knob)
Display Type :LED
Basic Parameter
Applicable IV set: Exclusive IV Set or standard single PVC IV Set (20 and 60 d/mL, with outer
diameter 3.4 ~ 4.5mm)
Temperature Range: 35℃~42℃(95~107.6F)
Optional Unit: (℃)and (℉)
Temperature Accuracy: ±1℃ or±1.8℉
Warning up time: ≤2min
Overheat Protection: 43℃
Alarm: Overheat, low temperature, system error, door open, heating remind.
more pictures of our blood infusion warmer:
Portable Blooed Infusion Warmer
Model:MCO-115A
Main Control System: It is the core of the whole system. It can intelligently control, manage and processing the signal of the system.
Heating Device: Consisted by the heating sheet and the heating exchanger. Deliver the heat to the fluid through exchanger.
Detection Sensor: Consisted by different kinds of sensor, eg. Temperature detection sensor.
Alarm system: Consisted by audio, visual alarm, remind the user the abnormal information to avoid the harm to the patient.
Input and display: Input the heating parameter, eg. Temperature, alarm message and other parameter.
Technical Specification:
Safety Compliance
Protection against electric shocks: Class II, include the internal power supply
Protection against leakage current: Type BF, the part without defibrillation discharge effect
Protection against splashing fluid: IPX1
Working Mode:Constant working mode
Input Voltage: 100-240V
Frequency: 50Hz/60Hz
Power: 85VA
Working and Transportation and storage conditions
Temperature :+5℃~+30℃
Relative Humidity :20~80%,not condensation
Atmospheric Pressure:70KPa~106Kpa
Transportation and Storage Temperature:-20℃~+55℃
Transportation and Storage Humidity :10~95%, not condensation
Transportation and Storage Atmospheric Pressure:50KPa~106Kpa
Transportation and Storage Condition : No corroded air and good ventilated environment
Physical Specification
Device Dimension:180mm×70mm×35mm
Weight:≈0.2KG (without knob); 0.4kg (with knob)
Display Type :LED
Basic Parameter
Applicable IV set: Exclusive IV Set or standard single PVC IV Set (20 and 60 d/mL, with outer
diameter 3.4 ~ 4.5mm)
Temperature Range: 35℃~42℃(95~107.6F)
Optional Unit: (℃)and (℉)
Temperature Accuracy: ±1℃ or±1.8℉
Warning up time: ≤2min
Overheat Protection: 43℃
Alarm: Overheat, low temperature, system error, door open, heating remind.
more pictures of our blood infusion warmer: